주파수 분석기 겸용 디지털 오실로스코프
|
CS320A: 디지털 오실로스코프(신호발생기 별매)
|
|
||
CleverScope 제품 비교표 내용 CS328A-XS CS328A CS320A Sampler 14 bit 10 bit 10 bit Sampler Option No 12 bit 혹은 14 bit 로 교환 가능 12 bit 혹은 14 bit 로 교환 가능 Memory 8 M 4 M 4 M Memory 추가 Option No No (공장에서 장착해야만 함) No (공장에서 장착해야만 함) Logic Analyzer Yes Yes No 주파수 발생기 Yes No No 주파수 발생기 Option No CS700 주파수 발생기 추가 가능 CS700 주파수 발생기 추가 가능 통신 Module USB 통신 모듈 USB 통신 모듈 USB 통신 모듈 통신 Module Option CS741 Ethernet 통신 모듈로 교환 가능 CS741 Ethernet 통신 모듈로 교환 가능 CS741 Ethernet 통신 모듈로 교환 가능
2009년 2월 12일에 소프트웨어 버젼 4.635 이 출시 되었습니다.
기존 하위 버젼 소프트웨어 사용자분들은 소프트웨어 업그레이드를 하시기 바랍니다.
Ethernet 옵션 : USB 통신 모듈을 메인 기판에서 분리한 후 같은 자리에 Ethernet 통신 모듈을 장착
주요 업그레이드 내용
: 디지탈 입력과 외부 트리거 (CS328에만 적용)의 캘리브레이션 개선
스펙트럼 결과에 대한 Maths 와 Full buffer Maths 포함
프로토콜 분석 기능 포함 (SPI, I2C 그리고 UART 분석) - Rom Loader v5.0 으로 업데이트를 실행한 후 사용 가능.
아래 내용 및 이미지를 참조하시기 바랍니다.
Maths can now be done on the Full Buffer and Spectrum graph.
SPI, I2C and UART are available immediately and work is continuing to enhance the capabilities, including saving and viewing saved files. Select your protocol .....
.....and see the analysis in the digital window .....
And best of all, it is available free to all existing users of Cleverscope.
The Digital inputs and External trigger are now included in the calibration process.
A new set of device drivers have been written and programming examples for the Windows Visual Studio C++, C#, Borland Delphi and CBuilder, and NI Labview and Labwindows CVI environments. These are all available for download from the website.
On the hardware side we are offering an XS version to make it easy for purchasers – this is a fully specified CS328A with 8MSample of memory, 14 bit sampler and a signal generator.
The ethernet interface is now available. At present it requires a different version of firmware to be loaded but we are working on a new firmware that will detect which interface is fitted. However, if you need ethernet we have stock for immediate shipment. It does not need to be on the local LAN, you can now connect to a Cleverscope anywhere in the world to control and acquire data.
To see a unit in operation connect to a CS328A at one of our labs. Go to Settings | Choose acquirer and programme as shown here – (note that the port setting is important)
We have connected the Signal Generator to Channel A and the probe comp to Channel B. This unit will be available for you to connect to for at least a couple of weeks. To try it out, I suggest you set the Sig Gen to sweep a range of frequencies and log the results to your PC. You will need v4.631 for this.
Just a short update on Linux, we have purchased the Labview development software and have succeeded in installing the NI-Visa drivers on a couple of distros. We will have a beta version of the CS300 available early in 2009.
CS320A는 USB를 이용하는 PC 오실로스코프 CS328A에 로직 분석기 기능이 빠진 제품입니다.
(참고로, PC Oscilloscope 는 장치에서 수집된 데이타를 표시, 분석, 저장 등의 대부분의 작업을 PC에서 하면서 원가를 절감하면서 기능을 강화한 제품을 말합니다)
CS320A 중요 링크 |
제품 구매 여부 결정에 관련된 중요한 링크를 몇 개 올렸습니다. |
CS320A 장치 리스트 |
아래의 장치가 CS320A에 포함됩니다: |
|
Cleverscope Model CS320A is a USB connected, PC hosted oscilloscope and spectrum analyser with PC based application software.
Here is our latest data sheet, available for you to download.
You will also find our demonstration software here as well as other useful resources
The following equipment is included with the CS320A:
Here is our latest data sheet, available for you to download.