MSO, 주파수 분석기 겸용 혼합 신호 디지털 오실로스코프(신호발생기(CS700A) 별매),
|
CS328A : 디지털 오실로스코프, 100MSample/sec, MSO, 로직분석기 포함
|
|
||
CleverScope 제품 비교표
내용 |
CS328A-XS |
CS328A |
CS320A |
Sampler |
14 bit |
10 bit |
10 bit |
Sampler Option |
No |
12 bit 혹은 14 bit 로 교환 가능 |
12 bit 혹은 14 bit 로 교환 가능 |
Memory |
8 M |
4 M |
4 M |
Memory 추가 Option |
No |
No (공장에서 장착해야만 함) |
No (공장에서 장착해야만 함) |
Logic Analyzer |
Yes |
Yes |
No |
주파수 발생기 |
Yes |
No |
No |
주파수 발생기 Option |
No |
CS700 주파수 발생기 추가 가능 |
CS700 주파수 발생기 추가 가능 |
통신 Module |
USB 통신 모듈 |
USB 통신 모듈 |
USB 통신 모듈 |
통신 Module Option |
CS741 Ethernet 통신 모듈로 교환 가능 |
CS741 Ethernet 통신 모듈로 교환 가능 |
CS741 Ethernet 통신 모듈로 교환 가능 |
Maths can now be done on the Full Buffer and Spectrum graph.
SPI, I2C and UART are available immediately and work is continuing to enhance the capabilities, including saving and viewing saved files. Select your protocol .....
.....and see the analysis in the digital window .....
And best of all, it is available free to all existing users of Cleverscope.
The Digital inputs and External trigger are now included in the calibration process.
A new set of device drivers have been written and programming examples for the Windows Visual Studio C++, C#, Borland Delphi and CBuilder, and NI Labview and Labwindows CVI environments. These are all available for download from the website.
On the hardware side we are offering an XS version to make it easy for purchasers – this is a fully specified CS328A with 8MSample of memory, 14 bit sampler and a signal generator.
The ethernet interface is now available. At present it requires a different version of firmware to be loaded but we are working on a new firmware that will detect which interface is fitted. However, if you need ethernet we have stock for immediate shipment. It does not need to be on the local LAN, you can now connect to a Cleverscope anywhere in the world to control and acquire data.
To see a unit in operation connect to a CS328A at one of our labs. Go to Settings | Choose acquirer and programme as shown here – (note that the port setting is important)
We have connected the Signal Generator to Channel A and the probe comp to Channel B. This unit will be available for you to connect to for at least a couple of weeks. To try it out, I suggest you set the Sig Gen to sweep a range of frequencies and log the results to your PC. You will need v4.631 for this.
Just a short update on Linux, we have purchased the Labview development software and have succeeded in installing the NI-Visa drivers on a couple of distros. We will have a beta version of the CS300 available early in 2009.
CS328A은 USB를 이용하는 PC 기반 혼합 신호 오실로스코프 입니다.
CS328A는 오실로스코프의 기능을 모두 갖고 있으면서 로직애널라이저의 기본 기능도 제공합니다.
2 아날로그 채널에 8 디지털 채널이 추가되어 풍부한 파형 정보를 보여 줌으로써 여러 회로 설계 지점에서 무슨 일이 일어나고 있는지 동시에 볼 수 있습니다.
(참고로, PC Oscilloscope 는 장치에서 수집된 데이타를 PC에서 표시, 분석, 저장 등의 대부분의 작업을 PC에서 하면서 원가 절감 및 기능 강화한 제품을 말합니다)
|
CS328A 중요 링크 |
제품 구매 여부 결정에 관련된 중요한 링크를 몇 개 올렸습니다. |
CS328A 장치 리스트 |
아래의 장치가 CS328A에 포함됩니다: |
|